Haulotte HTL4014, Operator'S Manual

Page: 169 / 194

A
B
C
D
E
F
G
H
I
163
2420331560 E 04 07 GB
TELESCOPIC HANDLERS
H
- LUBRIFICATION AND MAINTENANCE
• Filling the cooling system
• Open the expansion bottle plug.
• Fill the radiator GRADUALLY until the coolant has reached the correct level.
• Close the expansion bottle plug again.
• Switch the acceleration control lever to IDLING.
• Start the engine.
• Let the engine run AT IDLING SPEED for approx. 2 minutes.
• Stop the engine.
• Open the expansion bottle and refill if necessary.
15.2 - AIR FILTER
• Change the filter cartridges:
• Open the cover:
• Pull the trigger situated on the cover (See Section H, 6.5 (1))
• Locate the angular position of the cover, which should be identical upon reassembly.
• Turn the cover to the right (See Section H, 6.5 (2))
• Pull the cover to remove it
• Turn and pull the (primary) outer cartridge. Then pull the (secondary) inner cartridge (See Section
H, 6.5 (3)).
• Insert a new secondary cartridge, by pushing it to the bottom of the socket provided in the case.
• Place the new primary cartridge above the secondary cartridge, insert it in place with a rotation
movement near the stop
• Reassemble the cover, checking that the dust evacuation valve is directed downwards.
Perform the secondary cartridge change every 2 years or after every 5 maintenance operations.
Never clean the cartridge by hitting it against a hard surface or with a hot or inflammable liquid.
Never clean the secondary filter.
Check the state of the sealing ring before reassembling the cartridges.