Haulotte HTL4014, Operator'S Manual

Page: 65 / 194

A
B
C
D
E
F
G
H
I
59
2420331560 E 04 07 GB
TELESCOPIC HANDLERS
E
- ATTACHMENTS
1 - Approved attachments
To determine whether an attachment is approved for use on the machine in use, proceed as follows
before installation :
• The attachment model/option number indicated on the attachment identification plate must corres-
pond to the attachment number indicated on a capacity chart located in the operator's cab.
• The model indicated on the capacity chart must correspond to the model of the machine being
used.
• The center of gravity of the load on the fork (if applicable) must correspond to the center of gravity
of the load indicated on the capacity chart.
• Hydraulically-powered attachments must only be used on machines equipped with auxiliary hy-
draulics..
2 - Unapproved attachments
If any of the above conditions is not met, do not use the attachment. The machine may not
be equipped with the relevant capacity chart or the attachment may not be approved for the
machine model being used. Additional information can be obtained from HAULOTTE
Services
®
.
Do not use unapproved attachments for the following reasons :
• HAULOTTE ® cannot establish the capacity range limits for DIY, home-made, altered
or other unapproved attachments.
• An overextended or overloaded machine may tip over with little or no warning and
cause serious injury or death to the operator and/or those working nearby.
• HAULOTTE ® cannot guarantee the ability of an unapproved attachment to perform
its intended function safely.
Only use approved attachments. Attachments that have not been approved for use with this machine
may cause material and bodily damage, or even death.