manualshive.com logo in svg

Haulotte HTL4014, Operator'S Manual

Share
Download
Haulotte HTL4014 Operator'S Manual Download Page 26

20

2420331560

E 04 07

GB

TELESCOPIC HANDLERS

12

Stop and reversing lights: Clean, in good
condition and working properly.

13

Right axle locking cylinder: Cylinders in good condition, no leaks and securely-
fastened.

14

Wheel/Tire assembly: No loose or missing wheel nuts, inflated correctly.
Check the state of the tires and their level of wear.

15

Engine compartment :

•

Engine crankcase and radiator:  check the levels and refill as required. 
Check that the radiator is clean.

•

Drive belts: check their condition and replace as required.

•

Air filter blockage indicator: check if it is clogged. Replace the part as 
required.

•

Battery cables well secured, no visible damage or corrosion. 

•

Engine cover properly secured and locked.

16

Mirrors: Clean, in good condition and working properly.

17

Wheel/Tire assembly: No loose or missing wheel nuts, inflated correctly.

18

Dumping cylinder: Pins secure, hydraulic hoses in good condition, no leaks. 

19

Right stabilizer and contactors: Pins secure, hydraulic hoses and cylinders in
good condition, no leaks. 

20

Attachment: correctly installed (See Section E: Attachments).

Summary of Contents for HTL4014



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands