Haulotte HTL4014, Operator'S Manual

Page: 25 / 194

A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
G
H
I
19
2420331560 E 04 07 GB
TELESCOPIC HANDLERS
C
- PRE-OPERATION AND CONTROLS
Begin the walk-around inspection at item 1, as indicated below.
Continue to the right (anticlockwise, when viewed from above), checking each part in sequence.
N.B.: For each component, ensure that there are no loose or missing parts, that the components are
securely fastened and that there are no visible leaks or excessive wear in addition to any other
criteria mentioned. Inspect all structural elements including the attachment for detecting cracks,
excessive corrosion and other damage.
1 Jib cylinders (lifting and telescopic action cylinders, compensation output,
compensation input crowding) and cases :
• Pins secure, hydraulic hoses in good condition, no leaks.
• Check the tension of the extension and retraction cables and the a just-
ment shims.
• Check the state of pads.
2 Left stabiliser and contactors: Pins secure, hydraulic hoses and cylinders in
good condition, no leaks.
3 Front headlamps: Clean, in good condition and working properly.
4 Front axle: Steering cylinders in good condition, no leaks, pivot pins secure,
hydraulic hoses in good condition, no leaks.
5 Wheel/Tire assembly: No loose or missing wheel nuts, inflated correctly.
Check the state of the tires and their level of wear.
6 Hydraulic reservoir: Recommended fluid level on the level gauge (the lubricant
must be cold); filler/breather cap securely in place and in working order.
7 Cab and Electrical system
• General appearance, no visible damage, proper capacity charts and
Operator & Safety manual located in the manual holder.
• Window glass in good condition and clean.
• Gauges, switches, joystick, parking brake pedals and horn all opera-
tional.
• Check the seat belt for damage, replace it if it is frayed or the webbing
is cut, the buckles are damaged or the mounting hardware is loose.
• Open the inspection flap under the cab and check that the battery ca-
bles are well secured and that there is no visible damage or corrosion.
• Check for the presence of the load labels and capacity charts.
8 Fuel tank: Check the fuel level, refill as required, the filler cap is securely fas-
tened.
9 Wheel/Tire assembly: No loose or missing wheel nuts, inflated correctly.
Check the state of the tires and their level of wear.
10 Rear axle: Steering cylinders in good condition, no leaks, hydraulic hoses in
good condition, no leaks.
11 Left axle locking cylinder: Cylinders in good condition, no leaks and securely-
fastened.