Haulotte HTL4014 Operator'S Manual Download Page 170

Page: 170 / 194

164

2420331560

E 04 07

TELESCOPIC HANDLERS

15.3 - INTERNAL COMBUSTION ENGINE

• Change the engine belts.

15.4 - HYDRAULIC CIRCUIT

• Get the hydraulic pressures checked.

This operation must be performed by a HAULOTTE Services® technician.

• Change the oil:

Tank capacity: 110 litres.

For all engine maintenance operations: consult the guide provided by the engine manufacturer or
HAULOTTE Services®.

Drainage must be performed when the oil is hot.

• Place the machine in its folded position.

• Stop the engine.

• Go underneath the machine.

• Remove the filling plug, (2) on the photo opposite.

• Remove the drainage plug, (1) on the photo opposi-

te. Let the oil flow.

Summary of Contents for HTL4014



































































































































































































Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands

Haulotte HTL4014, Operator'S Manual

Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands