manualshive.com logo in svg

Harris Platinum Series, Technical Manual

Introducing the Haier Platinum Series, a phenomenal appliance designed to enhance your daily life. To ensure a seamless experience, we offer a comprehensive Operation Manual that walks you through every feature. Easily accessible and absolutely free, download the manual from manualshive.com today and unlock the full potential of your Haier Platinum Series product.

Share
Download
background image

544 1654 000 . RES 100 OHM 250W 5% . . . . . . . . 3. . .

A5R001 A6R001 A6R002

544 1660 000 . RES 100 OHM 20W 5% . . . . . . . . . 3. . .

A4R001 A4R002 A3R001

610 1222 000 . PLUG/RECP, D, 25 PIN . . . . . . . . . 1. . .
646 0665 000 . INSPECTION LABEL . . . . . . . . . . . 1. . .
646 1519 000 . LABEL, RF RADIATION WARN . . . 1. . .
843 4999 528 . PWB, PASS FET GATE BIAS . . . . . 1. . .
843 4999 637 . SCH, PA MODULE . . . . . . . . . . . . . 0. . .
843 4999 643 . FAMILY TREE, HB, PA MOD, . . . . 0. . .
917 2100 146 . TAPE SWITCH ASSY . . . . . . . . . . . 1. . .
917 2100 386 . CABLE, LED BOARD . . . . . . . . . . . 1. . .
917 2100 627 . CABLE ASSEMBLY, DC FEED . . . 1. . .
917 2100 747 . MAIN I/O CONN ASSY . . . . . . . . . . 1. . .
939 7900 054 . EXTRUSION, FLAPPER . . . . . . . . . 1. . .
943 4999 084 . MODULE FACE EXTRUSION . . . . 1. . .
943 4999 454 . MODULE FRONT PANEL . . . . . . . . 1. . .
943 4999 456 . MODULE COVER . . . . . . . . . . . . . . 1. . .
943 4999 518 . BUSS BAR, DC (VERTICAL) . . . . . 2. . .
943 4999 526 . INSULATOR, BUSS BAR . . . . . . . . 3. . .
943 4999 585 . ANGLE, HEATSINK MOUNTING . . 2. . .
943 4999 650 . CHASSIS, MODULE . . . . . . . . . . . . 1. . .
943 4999 651 . LOGIC CHASSIS . . . . . . . . . . . . . . 1. . .
943 4999 652 . LOGIC COVER . . . . . . . . . . . . . . . . 1. . .
943 4999 653 . CABLE, MODULE, MAIN . . . . . . . . 1. . .
943 5140 015 . SPACER, INSULATOR . . . . . . . . . . 2. . .

#BUSS BAR

992 8023 001 . PWA, LED BOARD . . . . . . . . . . . . . 1. . .

A007

992 8127 002 . PWA, LOGIC/CONTROL BD . . . . . 1. . .

A002

992 8557 007 . DIVIDER, HB, 2-WAY . . . . . . . . . . . 1. . .

A003

992 8558 007 . COMBINER, HB 2 X 2 WAY . . . . . . 1. . .

A006

992 8559 007 . COMB, HB, 2-WAY . . . . . . . . . . . . . 1. . .

A005

992 8560 007 . DIVIDER, HB, 2 X 2 WAY . . . . . . . . 1. . .

A004

992 8975 001 . COUPLER ASSY, HB MODULE . . . 1. . .

A001

992 9018 001 . RF PLUG ASSY . . . . . . . . . . . . . . . 1. . .

J001

Table 8-17. MODULE, DRIVER, BASIC HB, - 992 8963 001

HARRIS P/N

DESCRIPTION

QTY/UM

REF. SYMBOLS/EXPLANATIONS

007 4060 079 . BRZ, FGR STK 97-606-02 . . . . . . . .32 .

* 0.313 OF 16" = 5" 2 PIECES 2.5" REQ FOR
LOGIC COVER

054 0014 103 . CARTON, SHIPPING . . . . . . . . . . . 1. . .
054 0014 107 . INSERT, FOAM PACKAGING . . . . 1. . . ST
086 0004 056 . SOLDER, SN96/AG4 . . . . . . . . . . . 0. . .

#OUTPUT CABLES

252 0420 000 . WIRE, RIBBON 5 X 100 MIL . . . . . . .4 . . FT

FT #TO/FROM 1/4 MODS

252 0423 000 . TEFLON INSULATED HOOK-UP . . 2. . . FT
302 0052 000 . SCR, 4-40 X 1/4 . . . . . . . . . . . . . . . 11. .

6 LOGIC BD, 2# LOGIC REG3# LOGIC CHASSIS

302 0053 000 . SCR, 4-40 X 5/16 . . . . . . . . . . . . . . 3. . .

6#A2 3# LOAD RES

302 0054 000 . SCR, 4-40 X 3/8 . . . . . . . . . . . . . . . 4. . .

4# CABLE CLAMPS

302 0058 000 . SCR, 4-40 X 3/4 . . . . . . . . . . . . . . . 4. . .

2# PASS FETS 2# BUSS BARS

302 0106 000 . SCR, 6-32 X 3/8 . . . . . . . . . . . . . . . 2. . .

2# OUTPUT COUPLER

302 0108 000 . SCR, 6-32 X 1/2 . . . . . . . . . . . . . . . 10. .

2#I/O CONNECTOR 8# COVER

302 0364 000 . SCR, 4-40 X 3/16 . . . . . . . . . . . . . . 6. . .

6# CHASSIS COVER

302 0380 000 . SCR, 6-32 X 5/16 . . . . . . . . . . . . . . 11. .

#FRONT PANEL

302 0401 000 . SCR, 4-40 X 1/4 . . . . . . . . . . . . . . . 1. . .

1# ATTEN

306 0003 000 . NUT, HEX 4-40 . . . . . . . . . . . . . . . . 10. .

2# PASS FET 2# BUSS BAR
2# CLAMP PASS FETS 4# DC FEED CLAMPS

306 0004 000 . NUT, HEX 6-32 . . . . . . . . . . . . . . . . 4. . .

1# GRD WIRES, 2# LOGIC CHASSIS, 1# COUPLER

Section VIII - PA Module Parts List

10-15-96

(888-2365/2377/2378/2400/2402/2450-xxx)

8-13

WARNING: Disconnect primary power prior to servicing.

Summary of Contents for Platinum Series































































































































































Reviews:

No comments

Related manuals for Platinum Series

F.u.n.k.e. ATR833A-II-OLED Operation And Installation preview
ATR833A-II-OLED
Brand: F.u.n.k.e. Pages: 56
Caen ELS CT-600 User Manual preview
CT-600
Brand: Caen ELS Pages: 26
YOKOGAWA vigilantplant EJA Series User Manual preview
vigilantplant EJA Series
Brand: YOKOGAWA Pages: 79
MAMAC SYSTEMS PR-264 Technical Information preview
PR-264
Brand: MAMAC SYSTEMS Pages: 4
Cloud CXL-46T Installation Instructions preview
CXL-46T
Brand: Cloud Pages: 5
Labom CG201x series Operating Instructions preview
CG201x series
Brand: Labom Pages: 3
Vaisala GMD20 User Manual preview
GMD20
Brand: Vaisala Pages: 4
HESCH HE 5409 Operating Instructions Manual preview
HE 5409
Brand: HESCH Pages: 16
Icom IC-W32A Service Manual preview
IC-W32A
Brand: Icom Pages: 53
FMUser FSN-301 User Manual preview
FSN-301
Brand: FMUser Pages: 7
Simrad ES200-7CD - REV B Installation Manual preview
ES200-7CD - REV B
Brand: Simrad Pages: 28
Icom iM710 Instruction Manual preview
iM710
Brand: Icom Pages: 7
Audioplex VCRunner Installation Manual preview
VCRunner
Brand: Audioplex Pages: 2
M-system M6SXU Instruction Manual preview
M6SXU
Brand: M-system Pages: 5
Zaxcom ZMT-267 User Manual preview
ZMT-267
Brand: Zaxcom Pages: 34
Midland 70-3350 User Manual preview
70-3350
Brand: Midland Pages: 32
Sound Devices A10-TX-US User Manual preview
A10-TX-US
Brand: Sound Devices Pages: 27
Larson Electronics TX-500-120-240-50-60-AC Instruction Manual preview
TX-500-120-240-50-60-AC
Brand: Larson Electronics Pages: 2

Brands by name

Popular brands

Load more brands