Harris BMXDIGITAL 99-1200-0, Operation & Technical Manual

Page: 83 / 146

Revision C • 1/04
H A R R I S C O R P O R A T I O N
3-5
3 Operation
digital
PROGRAM BUSES
This section has the selectors for the four Program buses and
the two off-line buses.
P R P R P R P R P R O G R O G R O G R O G R O G R A M 1 , A M 1 , A M 1 , A M 1 , A M 1 , P R P R P R P R P R O G R O G R O G R O G R O G R A M 2 , A M 2 , A M 2 , A M 2 , A M 2 , P R P R P R P R P R O G R O G R O G R O G R O G R A M 3 , A M 3 , A M 3 , A M 3 , A M 3 ,
P R P R P R P R P ROGR O G R O G R O G R O G RAM 4 AM 4 AM 4 AM 4 AM 4 — — — — — When lit, routes the module audio to any
combination of the Program 1, Program 2, Program 3, and
Program 4 buses. When unlit, the module audio does not
feed that bus. These outputs are always post-switch and post-
fader.
O/L 1, O/L 1, O/L 1, O/L 1, O/L 1, O/L 2 (O O/L 2 (O O/L 2 (O O/L 2 (O O/L 2 (Off-Line 1, ff-Line 1, ff-Line 1, ff-Line 1, ff-Line 1, O O O O Off-Line 2) — ff-Line 2) — ff-Line 2) — ff-Line 2) — ff-Line 2) — When lit,
routes the module audio to any combination of the Off-Line
1 and Off-Line 2 buses (which are used for building up off-
air mix-minuses). The Off-Line feeds are always pre-switch,
but whether they are pre-fader or post-fader is set for all Input
and RLS modules through a DIP switch on the Session module.
For details on setting this option, see page 2-33 (Session Module
DIP switch settings).
MODE/PAN/BAL
This section has the controls for setting the module’s mode
(stereo or three mono modes) and the pan or balance of the
module’s bus outputs.
L and R — L and R — L and R — L and R — L and R — These buttons set the mode (stereo or mono).
When both buttons are unlit, the module is stereo. When the L
(left) button is lit, the left input feeds both the left and right
outputs. When the R (right) button is lit, the right input feeds
both the left and right outputs. When both L and R buttons
are lit, the left and right inputs are summed into a mono
mix, which then feeds both the left and right outputs.
R R R R Rotar otar otar otar otary P y P y P y P y Pan/B an/B an/B an/B an/Balanc alanc alanc alanc alance C e C e C e C e Con on on on ont r t r t r t r t rol — ol — ol — ol — ol — Controls where the
input is placed in stereo aural space when the PAN/BAL button
is lit. On a stereo signal, it functions as a balance control.
On a mono signal (either L or R, or both, are lit), it functions
as a pan pot.
P P P P PAN/B AN/B AN/B AN/B AN/BAL — AL — AL — AL — AL — When lit, the pan/balance control is active.
When unlit, the pan/balance control does not affect the audio.
Universal Input, Telco/Codec & RLS Modules