2 Installation
digital
Revision C • 1/04
H
A
R
R
I
S
C
O
R
P
O
R
A T
I
O
N
2-35
SETUP
SETUP —
SETUP —
SETUP —
SETUP —
SETUP —
These eight DIP switches affect logic functionality for the module per the Control Room
Module Switch Definitions below.
Control Room Module Switch Definitions
#
Switch Name
ON Function (set to operator’s left)
OFF Function (set to operator's right)
1
Headphone AutoCue
Cue is summed to the left channel, monitor
Cue feeds both headphone channels
functions (when active) is summed to the right channel
(Cue in stereo), monitor is muted
2
Talkback to Co-Host
Adds talkback to the co-host’s headphones
Does not add talkback to the co-host’s
Headphones
headphones
3
Talkback to Cue
Adds talkback audio to the Cue output
Talkback audio does not go to Cue
4
Dim Monitors when
Monitors dim by 12 dB when receiving
Monitors do not dim when receiving
Receiving Talkback
talkback
talkback
5
Auto-switch External
Automatic switching from External
No automatic monitor source switching
Inputs 1 & 2
1
Input 1 to Input 2 while there is a hot mic
with a hot mic in the Control Room
in the Control Room
6
Auto-switch External
Automatic switching from External
No automatic monitor source switching
Inputs 3 & 4
2
Input 3 to Input 4 while there is a hot mic
with a hot mic in the Control Room
in the Control Room
7
Spare Switch
8
Spare Switch
CONTROL ROOM MODULE SWITCHES
1
When set to ON, the monitor source automatically switches between External Input 1 (which typically has the
off-air monitor, with delay) and External Input 2 (which has a synthetic air signal with little or no delay). When
External 1 is selected as the monitor source, and a Control Room mic module is turned on, the monitor source
automatically changes to External Input 2. When all Control Room mic modules are off, then External Input 1 is
automatically selected.
2
When set to ON, the monitor source automatically switches between External Input 3 (which would be the off-air
monitor, with delay), and External Input 4 (which has a synthetic air signal with little or no delay). When External 3
is selected as the monitor source, and a Control Room mic module is turned on, the monitor source automatically
changes to External Input 4. When all Control Room mic modules are off, then External Input 3 is automatically
selected.
