Hardi NAVIGATOR VPZ, Instruction Book

Page: 102 / 204

5 - Operation
102
Operating the Control Units While Spraying
The control units in the tractor control the following functions in the field:
÷
NOTE! For further details of use, please refer to the SmartCom UT instruction book.
SetBox Controls
Grip Controls
A.
Power ON/OFF/status LED light. The light must be ON and
blinking.
B.
Distribution valves for the spray boom. Turns separate spray
sections On or Off.
•
The Switch is in up position: OFF.
•
The switch is in down position: ON.
C.
Main valve ON/OFF.
÷
NOTE! Check the current volume application rate on the display,
or see the instruction book for the spray controller for more
information.
Power ON/OFF/status, LED light. The light must be ON and blinking.
Automatic spray pressure regulation.
The regulation valve controls the main spray pressure. This is default
selection when the controller is powered ON, and it should remain
here during normal spraying.
Manual spray pressure regulation.
During normal spraying, these regulations should not be used, as the
regulation valve does this automatically.
The IntelliTrack function is used, when making turns in the field,
ensuring:
- a small turning radius.
- a better stability when turning.
- that the spray boom is perpendicular to the crop rows.
Press “auto” for automatic adjustment of the sprayer.
Press left or right arrow key to manually adjust the sprayer tracking
.
Optional function, A or B.
If extra equipment is fitted, it can be controlled from here.
Optional function.
E.g. end nozzle at the tip of the boom:
Select between angled end nozzle and standard nozzle.