HappyJapan HCH-701-30, Maintenance Manual

Page: 165 / 171

151a
Startup error and measure (Main program Ver.*1.37~)
7-3-1
Error message will be displayed if error occurs during machine startup.
After confirming contents, press button [OK] on control box to release error, then restore in accordance with
measure in this list.
Message Error Measure
Exchanged
control box or
CONT board does
not match for the
installed data of
[Machine setting].
When only control box has been
exchanged, open the menu of [4-4-4-5
Setup — Machine setting] and just close
without any amendment.
When CONT board has been exchanged,
follow the procedure of [4-4-4-7 Machine
Setting Navigation after exchanging CONT
board].
Installed frame
drive data in the
machine does not
match. Check setting contents of [Machine setting]
by referring [4-4-4-5 Setup—Machine
setting], then follow the procedure
[4-3-3
Machine program update].