HappyJapan HCH-701-30, Maintenance Manual

Page: 130 / 171

12 7b
Machine Setting Navigation after exchanging CONT board (Main program Ver.*1.34~)
4-4-4-7
After exchange CONT board, please activate [Machine
Setting Navigation after exchanging CONT board] function.
Then you can set necessary machine setting with one
process.
4-3-3 Machine program update
4-3-4 Main program update
4-3-5 Initializing of machine speed
・
Refer to [4-3-2 Preparation for program update] and
prepare latest update programs.
1.
Insert USB memory that contains data for
version up into insertion slot on the control box.
2. Refer to [4-4-1 How to enter Maintenance mode]
and
enter maintenance mode. The screen shows below:
3. Press Replaced CONT Board.
4
．
Press OK
.
5
．
Press
Skip
.
6
．
Press OK
.
7. Press OK
.
8. When the current machine program is older than latest
version, press OK .
The installation will be started.
If the current machine program is same or newer version,
press Cancel .
Start Setup-Navigation?
Cancel
OK
1
st
Step: Option Selection
OK
2nd Step: Program Update
OK
Save the latest program to USB memory
And set USB to USB slot on panel.
OK
3rd Step: Select machine serial No.
(for auto-machine setting)
OK