Needle-to-Feed Timing Adjustment
(
2
of
2
)
7mm
deflection
5
.
This picture shows the tip of the
needle flush with the top of the needle
plate and the feed dogs flush with the
top of the needle plate when going in
their downward (sewing motion)
rotation.
6.
While firmly holding the hand wheel
in place with one hand, slide the timing
belt onto the lower shaft with the other
hand.
7.
Place the idler back into position and
tighten the screw.
8.
While pushing on the middle of the
belt, there should be about 7mm
deflection.
3
7
