Automatic Thread Cutter Removal,
Adjustments, and Installation
(4 of 4)
5
5
The black post must fit into the hole of
the thread cutter
10.
Align the thread cutter with the step motor.
11.
When reattaching, the black post of the
step motor must fit into the access hole of the
thread cutter plate. Tighten the two screws. To
ensure the thread cutter is connected correctly,
push the long extending blade all of the way
out then back in again. It should move
smoothly and you should only feel the tension
of the step motor.
12.
Place the thread cutter assembly onto the
machine and replace the two large Phillips
screws.
