Stretch Stitch Feed Balance
(2 of 2)
5
7
5.
The correct distance between six of the 8s
as shown should be 33 to 39mm.
6.
If it isn’t, press the right arrow key to bring
the adjusting screw into position. Locate the
hex screw on the feed adjusting bracket. With
a 2mm hex tool turn the screw clockwise to
make the stitch longer or counter-clockwise to
make the stitch shorter.
Do not loosen the lock nut.
Note: The photo is shown with base cover off.
However this adjustment is accessible by
removing the base lid in the base cover.
7.
After each mechanical adjustment, press the
right arrow to recalibrate the feed step motor.
Press the start/stop button to sew out the 8s
and verify the distance.
33-39mm
35mm
35mm
