Front Panel Removal
(1 of 3)
1.
Open the face plate on the left side of
the machine and locate the small
Phillips head washer screw directly
behind the
“Reverse”
button that is
holding the front panel to the casting.
Loosen
this screw
a couple turns
, but
do not remove it.
2.
Loosen
a couple turns
, but do
not remove, the
Phillips head washer
screw at the upper-right side of the
front panel.
3
. With the belt cover removed, look in
through the right side of the machine
below the hand wheel. Locate the
washer screw deep inside the machine
behind the timing belt. Loosen the
washer screw
a couple turns
but do not
remove it.
8
