Hammond A-3, Playing Manual

Page: 85 / 180

85
HA<O> XK-5 Owner’s Playing Guide
Frequency
Level
Waveform,
Rate
Resonance
Sensitivity
Modulation
Source
⓮ ⓯ ⓰ ⓱ ⓲ ⓳ ⓴
Wah-Wah
“Wah-Wah” is a periodic emphasis and de-emphasis of upper frequencies by means of a
frequency filter to impart a speech-like quality to the sound.
⓯ WAH-WAH - SOURCE
This allows you to select the source of the Wah-Wah control.
EXP: Uses the Expression Pedal like a “Wah Wah pedal.”
LFO: Auto-Wah using the built-in ‘LFO” (Low Frequency Oscillator).
⓰ WAH-WAH - SENSITIVITY
This allows you to set the sensitivity to change the Wah effect of LFO or Expression
Pedal.
The setting range is “0” to “127.” The dynamic response increases as the value rises.
⓱
WAH-WAH - RESONANCE
This allows you to boost the cut-off frequency range of the Low-pass Filter and gives a
more pronounced “Wah” effect.
The setting range is “0” to “127.” The resonance increases as the value rises.
⓲
WAH-WAH - WAVEFORM
When the SOURCE ⓯ is set at “LFO,” the LFO wave form is set.
Tri:
Triangle wave. The sound smoothly varies.
Sqr:
Square wave. The filter suddenly opens and suddenly closes.
Saw:
Sawtooth wave. Repeated smooth cyclical changes in the sound.
S&H:
Sample & Hold. Random changes to the sound.
⓳
WAH-WAH - RATE
When the SOURCE ⓯ is set at “LFO,” the cycle rate is adjusted.
The setting range is “0” to “127.” The rate becomes faster as the value increases.
⓴
WAH-WAH - FREQUENCY
This allows you to adjust the central frequency.
The setting range is “0” to “127.” The frequency becomes higher as the value is increased.
⓮ ⓯ ⓰ ⓱
Time
Left Right
Depth
Rate
⓯ AUTO PAN - WAVEFORM
This allows you to set which waveform to modulate the direction.
Tri: Triangle wave. The direction smoothly changes.
Sqr: Square wave. The direction suddenly moves to the left, and suddenly moves to the right.
Saw: Sawtooth waveform. The direction repeatedly moves from left to right.
S&H: Sample & hold. The direction changes randomly.
DSqr: Dull square wave like the old electric piano effect (recommended).
⓰ AUTO PAN - RATE
This allows you to adjust the speed of the modulation.
The setting range is “0” to “127.” The higher the value, the faster the modulation.
⓱
AUTO PAN DEPTH
This allows you to adjust the depth of the cycle.
The setting range is “0” to “127.” At “0,” there is no direction modulation. The higher the
value, the deeper the effect becomes. At “127,” you can give a perfect left/right repetition.
Auto Pan
“Auto Pan” smoothly shifts the sound back and forth between Left and Right channels.
NOTE: This Multi-Effect requires that both Left and Right channels be connected via the
LINE OUT jacks
.