Hammond A-3, Playing Manual

Page: 75 / 180

75
HA<O> XK-5 Owner’s Playing Guide
Rotor
Speed:
Rise
Time
Fall
Time
Brake
Time
Mode:
SLOW FAST SLOW FAST STOP
Delay
Time
❹ / ⓭ SLOW SPEED - HORN / DRUM (L)
These allow you to set the rotor speed for the Slow or Chorale
mode.
The setting range is 0, 24 to 318 rpm.
❺ / ⓮
FAST SPEED - HORN / DRUM (L)
These allow you to set the rotor speed on the “FAST” or Tremolo
mode.
The setting range is 0, 375 to 453 rpm.
❻ / ⓯
RISE TIME - HORN / DRUM (L)
These allow you to set the time for the rotors to “ramp up” to the
“FAST” speed,when switching from “SLOW” or “STOP” to the
“FAST” mode.
The setting range for the Horn rotor is 0.2 to 5.0 sec., and the Bass rotor is 0.5 to 12.5 sec.
❼ / ⓰
FALL TIME - HORN / DRUM (L)
These allow you to set the time for the rotor to reach the ‘Slow Speed’, when switching from
“FAST” to “SLOW” mode.
The setting range for the Horn rotor is 0.2 to 5.0 sec., and the Bass rotor is 0.5 to 12.5 sec.
❽ / ⓱
BRAKE TIME - HORN / DRUM (L)
These allow you to set the time for the rotor to stop, when switching from “FAST” to the
“STOP” mode.
The setting range for the Horn rotor is 0.2 to 5.0 sec., and the Bass rotor is 0.5 to 12.5 sec.
❾ / ⓲ DELAY TIME - HORN / DRUM (L)
These allow you to set the time to the speed starts changing, when the mode
is switched.
The setting range is 0 to 0.8 sec.
❿ / ⓳ MIC WIDTH - HORN / DRUM (L)
These allow you to set the Virtual Leslie Speaker at which location the Micro-
phones should be placed.
“Width” sets the distance between the left and the right microphones. The
setting range is 0 to 40. The value increases makes wider stereophonic. At “0,”
mono.
⓫ / ⓴
MIC CENTER - HORN / DRUM (L)
These allow you to set the offset between the center of two microphones and
pivot of the rotor.
The setting range is -50 to +50 cm. The virtual Leslie speaker turns counter
clockwise for Horn rotor, and clockwise for Drum rotor. To emphasize the
‘upcoming’, set the ‘+’ value for Horn rotor, and ‘-’ value for Drum rotor.
⓬ / ㉑
MIC DISTANCE - HORN / DRUM (L)
These allow you to set the distance between the Virtual Leslie Speaker and the
microphones.
The setting range is 30 to 200 cm. The value decreases makes deeper effect.
㉒ / ㉓ / ㉔ LEVEL - SUB BASS / DRUM / HORN (L)
These allow you to set the volume levels of the each rotor and the sub bass sound not modu-
lated with the Drum rotor.
The setting range is -12 to 0 dB.
㉕
CROSSOVER
These allow you to is set the diverging point of the frequencies of the Sub Bass and the Drum
rotor respectively.
The setting range is 20 to 248 Hz. The higher the value rises, the more lowered are the
modulation effects of the Pedals.
Distanc
e
Sub Bass
Drum Rotor
Horn Rotor
Center
Width