Hammond A-3, Playing Manual

Page: 128 / 180

To locate this Menu, follow the steps below:
HA<O> XK-5 Owner’s Playing Guide
128
SYSTEM Edit Menu
This Edit Menu allows you to set the System Parameters and to display the Software Version(s).
u
POWER
❶
POWER - AUTO OFF
This allows you to set whether the power to the instrument IA
automatically turned “OFF” after a certain time interval.
30min
The AC power to the instrument wil turn “OFF” is 30 minutes have
elapsed with no keys or buttons being pressed.
DISABLE
The instrument will turn “ON” or “OFF” with the AC power switch,
but not turn “OFF” automatically.
u
USB
❷ MASS STORAGE
This allows you to determine how the USB TO HOST jack will
function.
OFF
MIDI and audio data is received and transmitted.
ON
Use a storage device such as a USB Flash Drive or external hard
drive.
u
PERIPHERAL DEVICE
❸
IS ACTIVE - XLK
This shows whether the Lower Manual (e.g. XLK-5) is active over
the H-BUS jack.
❹
IS ACTIVE - CU1
This shows whether a connected CU-1 unit (Leslie Speed switch) is
active via the H-BUS connection.
❺
IS ACTIVE - XPK
This shows whether a Pedal Clavier (e.g. XPK-250) is active over
the H-BUS jack.
❻ IS ACTIVE - AUDIO
This shows the status of the LINE OUT jacks.
ST Stereo output - Both the L and R jacks are connected.
MONO
Mono output - Only the L/MONO jack is connected.
❼ IS ACTIVE - LESLIE
This shows whether a Leslie Speaker cabinet is connected via the
LESLIE 11-pin jack.
❽
IS ACTIVE - FOOT CONTROLLER 1
This shows whether a device is connected to the FOOT CON-
TROLLER 1 jack.
❾ IS ACTIVE - FOOT CONTROLLER 2
This shows whether a device is connected to the FOOT CON-
TROLLER 2 jack.
❿
IS ACTIVE - EXP-100
This shows whether an EXP-100F Expression Pedal is connected.
NOTE: This jack is intended for the Hammond EXP-100F ONLY.
Other devices will not be recognized.
u
SOFTWARE VERSION
⓫
VERSION - MAIN PROGRAM
⓬
VERSION - SUB PROGRAM
⓭ VERSION - INFORMATION
⓮ VERSION - D. S. P. PROGRAM
⓯
VERSION - FACTORY PATCHES
⓰
VERSION - CONTROL PANEL
The above listings are the software modules for the various parts of
the instrument. Use the [  ][  ] Touch Buttons to see the versions
for each one.
MENU/EXIT     
 ENTER
❸ ❹ ❺ ❻ ❼
❶
❷
❽ ❾
⓫
❿
⓬ ⓭ ⓮
⓯ ⓰