Hammond A-3, Playing Manual

Page: 135 / 180

135
HA<O> XK-5 Owner’s Playing Guide
MIDI Edit Menu
This Edit Menu allows you to set the overall MIDI parameters for the instrument and and perform a MIDI Dump operation.
u
MIDI TEMPLATE
❶
MIDI TEMPLATE
This allows you to select the MIDI Template you want to use.
Use the [
 ][  ] Touch Buttons to select the desired Template and
press the [ENTER] Touch Button tp make your selection.
See “MIDI TEMPLATE” in the APPENDIX (P. 160) for the
details of each MIDI Template.
u
MASTER
❷
MIDI IN
This allows you to set the function of the MIDI IN LOWER/
OTHER jack.
NOTE: The MIDI IN PEDAL jack is not affected by this parameter
setting.
SEQUENCE:
Incoming MIDI data plays UPPER, LOWER and PEDAL parts, but is
not retransmitted.
LOWER:
Incoming MIDI data plays the LOWER part and is retransmitted
on MIDI Channel 12. The [SPLIT] Touch Button is ignored. The
XK-5 works as UPPER.
UPPER:
Incoming MIDI data plays the PEDAL part and is retransmitted on
MIDI Channel 11. The [SPLIT] Touch Button is ignored. The XK-5
works as LOWER.
❸ LOCAL
This allows you to switch Local Control ON/OFF.
ON: The XK-5 will play both its internal sounds and the sounds from
a connected MIDI device. Incoming MIDI data on the Keyboard
channels are used only for playing the internal sounds - they are
not retransmitted.
OFF: The XK-5 will play only the sounds from a connected MIDI device
and the internal sounds are silenced. Incoming MIDI data on the
Keyboard Channels are re-sent by the External Zones.
❹
NRPN
This allows you to select whether to send NRPN (Non-Registered
Parameter Number) data.
On the XK-5 NRPN is used for transmitting messages such as
Drawbar Fold Back or Leslie ON. NRPN is transmitted through
the UPPER channel.
When “ON,” transmitted. When “OFF,” not transmitted.
❺
LESLIE
This is for controlling how to send Leslie Parameters. The Leslie
Parameters are sent on UPPER Channel.
XK: The Leslie Parameters are sent out as normal NRPN codes.
21: The Leslie Parameters are sent out as Leslie 21 series NRPN codes.
NOTE: When a Cabinet Number is selected (i.e. by Patch),
the parameters are sent out also.
NOTE: This parameter will change automatically when
a Leslie speaker is connected or disconnected via the
11-pin LESLIE jack.
❻
PROGRAM CHANGE
Turns Program Change “ON” or “OFF.” When “ON,” transmit-
ted. When “OFF,” not transmitted.
❼ DRAWBAR REGISTRATION
Turns current Drawbar settings “ON” “OFF.” When “ON,” trans-
mitted. When “OFF,” not transmitted.
❽
EXTERNAL ZONE - WHOLE
Turns transmission of all six External Zones “ON” or “OFF.”
When “ON,” transmitted. When “OFF,” not transmitted.
❾ EXTERNAL ZONE - PROGRAM CHANGE
This allows you to set the Program Change numbers and Bank
Select settings for each External Zone.
MENU/EXIT
  
   ENTER
To locate this Menu, follow the steps below:
❷
❶
❸ ❹ ❺ ❻ ❼ ❽ ❾ ❿
⓫ ⓬ ⓭ ⓮ ⓯ ⓰ ⓱ ⓲
⓳ ⓴ ㉑ ㉒