Hammond A-3, Playing Manual

Page: 87 / 180

87
HA<O> XK-5 Owner’s Playing Guide
Frequency
Level
Mix
Depth
Manual
Rate
Modulation
HPF
effect range
⓮ ⓯ ⓰ ⓱
⓲ ⓳ ⓴
⓯
PHASER - RATE
This allows you to adjust the frequency speed.
The setting range is “0” to “127.” The cycle becomes faster as the value increases.
⓰
PHASER - DEPTH
This allows you to adjust the depth of modulation.
The setting range is “0” to “127.” The modulation becomes deeper as the value increases.
⓱
PHASER - RESONANCE
This allows you to adjust the resonance (feed-back) amount.
The setting range is “0” to “127.” The resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
⓲
PHASER - MANUAL
This allows you to set the middle frequency of the phase effect.
The setting range is “0” to “127.” The frequency becomes higher as the value increases.
⓳
PHASER - MIX
This allows you to adjust the volume balance between the “dry” and the effect sound.
The setting range is “0” to “127.” At “0,” only “dry” is heard. The effect level becomes
greater as the value increases. At “127,” the ratio between the “dry” and the effect sounds
becomes 1:1.
⓴ PHASER - HPF
This allows you to control the frequency range of the effect.
The setting range is “0” to “127.” At “0,” the effect is added to all frequencies. The effect
is added to the higher frequencies as the value increases.
Phaser
“Phaser” will create the effect of splitting an audio signal into two paths and varying their
phase relationship to each other, resulting in an alternately hollow and full-bodied sound. It
can be described as a “swooshing” or “twisting” effect.