Hammond A-3, Playing Manual

Page: 92 / 180

HA<O> XK-5 Owner’s Playing Guide
92
REVERB Edit Menu
This Edit Menu allows you to make changes to the Reverb.
MENU/EXIT
  
ENTER
Or, Press and Hold the [REVERB] Touch Button.
❶ DEPTH
This allows you to control the overall amount of the Reverb Effect.
The setting range is “0” to “127.”
❷ TYPE
This allows you to select the type of Reverb.
Room 1: Small room
Room 2: Large room
Live: Ambient room
Hall 1: Large Hall
Hall 2: Small Hall
Church: Church
Plate: Iron-plate Reverb
Spring: Spring Reverb
Delay: Delay
PanDly: Panning Delay
RevDly: Delay
❸ REVERB TIME
This allows you to control the length of the Reverb for Reverb Types “Room 1” through “Spring.”
The setting range is “0” to “127.” The decay becomes greater as the value is increased.
❹
DELAY TIME
This allows you to control the delay time for Reverb Types “Delay,” “PanDly” and “RevDly..”
The setting range is 4.7 to 2000ms. The delay becomes longer as the number value is increased.
NOTE: You can program the Foot Switch to set the delay time. (P. 122 #1)
❺
DELAY FEEDBACK
This allows you to control the number of repetitions for Reverb Types “Delay,” “PanDly” and “RevDly.”
The setting range is 0 to 96%. The repetition becomes greater as the value is increased.
NOTE: Type (#2) is a macro-parameter. When the Reverb Type is changed, each Reverb Parameter (#3 to #5) is automatically set to the
recommended value.
❻ LESLIE ON REVERB
Turns the Reverb effect for the Leslie “ON” (LED lit) or “OFF” (LED not lit).
OFF: Leslie to Reverb
ON: Reverb to Leslie
NOTE: All the parameters described on these pages are Patch Parameters and can be stored to individual Patches. For a complete listing
of all Patch Parameters, please consult the APPENDIX at the back of this Guide.
To locate this Menu, follow the setps below:
❶ ❷
❸ ❹ ❺
❻