6
Subject to change without notice
S p e c i f i c a t i o n s
HMO2022/2024E/191212 · C&E · Subject to change without notice · © HAMEG Instruments GmbH
®
· DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 8000 · Fax +49 (0) 6182 800100 · www.hameg.com · info
@
hameg.com
Display functions
Marker:
up to 8 user definable marker for easy
navigation; automatic marker using search
criteria
V
irtual
S
creen:
virtual Display with 20 div. vertical for all
Math-, Logic-, Bus- and Reference Signals
Busdisplay:
up to 2 busses, user definable, parallel or
serial busses (option), decode of the bus
value in ASCII, binary, decimal or hexa-
decimal, up to 4 lines; Table view of the
decoded data
Mathematic functions
Number of formula sets:
5 formula sets with up to 5 formulas each
Sources:
All Channels and math. memories
Targets:
Math. memories
Functions:
ADD, SUB, 1/X, ABS, MUL, DIV, SQ, POS,
NEG, INV, INTG, DIFF, SQR, MIN, MAX, LOG,
LN, Low-, High-pass filter
Display:
Up to 4 math. memories with label
Pass/Fail functions
Sources:
Analog Channels
Type of test:
Mask around a signal, userdefined
tolerance
Functions:
Stop, Beep, screen shot (screen print-out)
and/or output to printer for pass or fail, event
counting up to 4 billion, including the number
and the percentage of pass and fail events
General Information
Component tester:
Test voltage:
10 V
P
(open) typ.
Test current:
10 mA
P
(short) typ.
Test frequency:
50 Hz / 200 Hz typ.
Reference Potential:
Ground (safety earth)
Probe ADJ Output:
1 kHz/1 MHz square wave signal ~1V
pp
(ta
<
4 ns)
Bus Signal Source:
SPI, I
2
C, UART, Parallel (4 Bit)
Internal RTC
(Realtime clock)
:
Date and time for stored data
Line voltage:
100…240 V, 50…60 Hz, CAT II
Power consumption:
Max. 45 W, typ. 25 W [max. 55 W, typ. 35 W]
Protective system:
Safety class I (EN61010-1)
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
Theft protection:
Kensington Lock
Dimensions
(W x H x D)
:
285 x 175 x 140 mm
Weight:
<
2.5 kg
Accessories supplied:
Line cord, Operating manual, 2 [4] Probes, 10:1 with
attenuation ID (HZO10), CD, Software
Recommended accessories:
HOO10 Serial bus trigger and hardware accelerated decode, I
2
C, SPI,
UART/RS-232 on Logic Channels and Analog Channels
HOO11 Serial bus trigger and hardware accelerated decode, I
2
C, SPI,
UART/RS-232 on Analog Channels
HOO12 Serial bus trigger and hardware accelerated decode,
CAN, LIN on Logic Channels and Analog Channels
HO3508 Active 8 Channel Logic Probe
HO730 Dual-Interface Ethernet/USB
HO740 Interface IEEE-488 (GPIB) galvanically isolated
HZO91 4RU 19" Rackmount Kit
HZO90 Carrying Case for protection and transport
HZO20 High voltage probe 1,000:1 (400 MHz, 1,000 V
rms
)
HZO30 Active probe 1 GHz (0.9 pF, 1 MΩ, including many accessories)
HZO40 Active differential Probe 200 MHz (10:1, 3.5 pF, 1 MΩ)
HZO41 Active differential Probe 800 MHz (10:1, 1 pF, 200 kΩ)
HZO50 AC/DC Current probe 30 A, DC…100 kHz
HZO51 AC/DC Current probe 100/1,000 A, DC…20 kHz
HMO2022/2024E/191212 · C&E · Subject to change without notice · © HAMEG Instruments GmbH
®
· DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 8000 · Fax +49 (0) 6182 800100 · www.hameg.com · info
@
hameg.com
Display functions
Marker:
up to 8 user definable marker for easy
navigation; automatic marker using search
criteria
V
irtual
S
creen:
virtual Display with 20 div. vertical for all
Math-, Logic-, Bus- and Reference Signals
Busdisplay:
up to 2 busses, user definable, parallel or
serial busses (option), decode of the bus
value in ASCII, binary, decimal or hexa-
decimal, up to 4 lines; Table view of the
decoded data
Mathematic functions
Number of formula sets:
5 formula sets with up to 5 formulas each
Sources:
All Channels and math. memories
Targets:
Math. memories
Functions:
ADD, SUB, 1/X, ABS, MUL, DIV, SQ, POS,
NEG, INV, INTG, DIFF, SQR, MIN, MAX, LOG,
LN, Low-, High-pass filter
Display:
Up to 4 math. memories with label
Pass/Fail functions
Sources:
Analog Channels
Type of test:
Mask around a signal, userdefined
tolerance
Functions:
Stop, Beep, screen shot (screen print-out)
and/or output to printer for pass or fail, event
counting up to 4 billion, including the number
and the percentage of pass and fail events
General Information
Component tester:
Test voltage:
10 V
P
(open) typ.
Test current:
10 mA
P
(short) typ.
Test frequency:
50 Hz / 200 Hz typ.
Reference Potential:
Ground (safety earth)
Probe ADJ Output:
1 kHz/1 MHz square wave signal ~1V
pp
(ta
<
4 ns)
Bus Signal Source:
SPI, I
2
C, UART, Parallel (4 Bit)
Internal RTC
(Realtime clock)
:
Date and time for stored data
Line voltage:
100…240 V, 50…60 Hz, CAT II
Power consumption:
Max. 45 W, typ. 25 W [max. 55 W, typ. 35 W]
Protective system:
Safety class I (EN61010-1)
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
Theft protection:
Kensington Lock
Dimensions
(W x H x D)
:
285 x 175 x 140 mm
Weight:
<
2.5 kg
Accessories supplied:
Line cord, Operating manual, 2 [4] Probes, 10:1 with
attenuation ID (HZO10), CD, Software
Recommended accessories:
HOO10 Serial bus trigger and hardware accelerated decode, I
2
C, SPI,
UART/RS-232 on Logic Channels and Analog Channels
HOO11 Serial bus trigger and hardware accelerated decode, I
2
C, SPI,
UART/RS-232 on Analog Channels
HOO12 Serial bus trigger and hardware accelerated decode,
CAN, LIN on Logic Channels and Analog Channels
HO3508 Active 8 Channel Logic Probe
HO730 Dual-Interface Ethernet/USB
HO740 Interface IEEE-488 (GPIB) galvanically isolated
HZO91 4RU 19" Rackmount Kit
HZO90 Carrying Case for protection and transport
HZO20 High voltage probe 1,000:1 (400 MHz, 1,000 V
rms
)
HZO30 Active probe 1 GHz (0.9 pF, 1 MΩ, including many accessories)
HZO40 Active differential Probe 200 MHz (10:1, 3.5 pF, 1 MΩ)
HZO41 Active differential Probe 800 MHz (10:1, 1 pF, 200 kΩ)
HZO50 AC/DC Current probe 30 A, DC…100 kHz
HZO51 AC/DC Current probe 100/1,000 A, DC…20 kHz
Differences within the HMO series 72x...202x:
Most of the specifications of the HMO series 72x ... 202x are identical. Please find the most important differences at the
following table.
unit
bandwidth
vertical settings at 1MOhm
input impedance
offset range
HMO72x
70 MHz
1 mV...10V/Div
1 MOhm
-
HMO102x
100 MHz
1 mV...10V/Div
1 MOhm
-
HMO152x
150 MHz
1 mV…5 V/Div
1 MOhm / 50 Ohm
±0,2…±20 V
HMO202x
200 MHz
1 mV…5 V/Div
1 MOhm / 50 Ohm
±0,2…±20 V
For the complete and latest technical data of each oscilloscope of the HMO series please refer to www.hameg.com.
