Hameg HMO Series, Manual

Page: 3 / 64

3
Subject to change without notice
C o n t e n t
Content
0.1 General information regarding the CE marking 2
0.2 Digital Oscilloscope HMO Series 72x...202x 4
0.3 Specifications 5
1 Installation and safety instructions 7
1.1 Symbols 7
1.2 Setting up the instrument 7
1.3 Safety 7
1.4 Correct operation 7
1.5 Ambient conditions 7
1.6 Warranty and repair 7
1.7 Maintenance 8
1.8 CAT 0 8
1.9 Mains voltage 8
1.10 Product Disposal 8
1.11 Batteries and rechargeable batteries / cells 8
2 Familiarize yourself with your new HMO 10
2.1 Front view 10
2.2 Control panel 10
2.3 Screen 11
2.4 Rear view 11
2.5 Options 12
2.6 General concept of instrument operation 12
2.7 Basic settings and integrated help 13
2.8 Bus Signal Source 14
2.9 Updates for the firmware, the help functions
and languages 14
2.10 Upgrade with software options 14
2.11 Self Alignment 15
2.12 Logic Probe Self Alignment 15
3 A quick introduction 16
3.1 Setting up and turning the instrument on 16
3.2 Connection of a probe and signal capture 16
3.3 Display of signal details 17
3.4 Cursor measurements 17
3.5 Automatic measurements 18
3.6 Mathematical functions 18
3.7 Storing data 19
4 Vertical system 20
4.1 Coupling 20
4.2 Sensitivity, Y-Positioning, and Offset 20
4.3 Bandwidth Limit and Signal Inversion 21
4.4 Probe attenuation selection 21
4.5 Level Setting 21
4.6 Name a channel 21
5 Horizontal System (Time Base) 22
5.1 Capturing modes RUN and STOP 22
5.2 Time base adjustments 22
5.3 Capture modes 22
5.4 Interlace Mode 24
5.5 ZOOM function 25
5.6 Navigation Function 25
5.7 Marker Function 25
5.8 Search Function 25
6 Trigger System 27
6.1 Trigger modes Auto, Normal, Single 27
6.2 Trigger sources 27
6.3 Slope trigger 27
6.4 Pulse trigger 28
6.5 Logic trigger 28
6.6 Video trigger 29
7 Display of signals 30
7.1 Display settings 30
7.2 Use of the virtual screen area 31
7.3 Signal intensity and persistence functions 31
7.4 XY display 31
8 Measurements 33
8.1 Cursor measurements 33
8.2 Auto measurements 34
9 Analysis 36
9.1 Mathematical Functions 36
9.2 Frequency Analysis (FFT) 38
9.3 Quick View 39
9.4 PASS/FAIL Test Based on Masks 39
10 Documentation, storing and recalling 41
10.1 Instrument settings 41
10.2 References 42
10.3 Traces 42
10.4 Screenshots 43
10.5 Formula Sets 43
10.6 FILE/PRINT Key Definition 43
11 Component test 44
11.1 General 44
11.2 In-circuit tests 45
12 Mixed Signal Operation (optional) 46
12.1 Logic trigger 46
12.2 Display functions of the logic channels 46
12.3 Cursor measurements for the logic channels 47
13 Serial bus analysis (optional) 48
13.1 Serial Bus Configuration 48
13.2 Parallel BUS 49
13.3 I
2
C BUS 49
13.4 SPI / SSPI BUS 51
13.5 UART/RS-232 BUS 53
13.6 CAN BUS 54
13.7 LIN BUS 56
14 Remote control 58
14.1 RS-232 58
14.2 USB 58
14.3 Ethernet (Option HO730) 58
14.4 IEEE 488.2 / GPIB (Option HO740) 58
15 Appendix 59
15.1 List of figures 59
15.2 Glossary 60