
Software
75
Disabled Run
When no heater is selected or no liquid test cell is
assigned then the HV On/Off button is disabled and
the sequence can not be started.
Run
By clicking on the Run button the sequence starts.
Running Sequence
After starting the sequence the source selection, the
Load, the Save As and the Compile button are
disabled.
Below the source code text field the actual command
is displayed.
Stop Sequence
By clicking on the Stop button the sequence ends.
Before a sequence apply AC/DC voltage or short the test cell a dialog pops up to warn and inform
the user which test cell and heater has to be connected to the 2831. On the dialogs is a Break
button to abort the sequence without applying any voltage and a OK button to confirm the correct
test cell connection and the HV warning.
Summary of Contents for 2830
