
36
Software
measurement results will be deleted. It is
recommended to make a new file or open an
existing one before the measurements start.
(see chapter 9.2 File Manager)
Beside the thermometer the current liquid
temperature (orange number) and the set
target temperature (see chapter 9.3.3 Heating
cell(s)) is displayed.
Hot Test Cell
When the test cell temperature is higher than
45 °C, then the cell color changes to red. Then
the cell should not be touched without a heat
protection means such as clothes.
During a Measurement
During a measurement the cell symbol is
disabled but not the heater On/Off button.
Additional a HV warning symbol appears. This
symbol appears during AC or DC HV is
applied and also during a cell shorting phase.
Switch On/Off the Heater
By clicking on this button you can switch on
and off the heater.
The symbol indicates the current state of the
heater: A grey symbol means the heater is off
and a red symbol means the heater is running.
Summary of Contents for 2830
