
32
Software
9.1.2
Basic Window structure
The software consists of one window with multiple tab sheets on the right side. The buttons on the
bottom are dynamic assigned depending on the selected tab sheet. The heater & cell section on
the top is also dynamic. It could display either one to two liquid heater, to which one liquid test cell
can be assigned, or one solid test cell depending on the heater selection (see 9.3.3 Heating
cell(s)). The Setup tab sheet has no heater & cell section. The middle section, where the
measuring values are displayed and stored and the voltage, frequency, electrification time etc. can
be set, looks almost the same for the “C Tanδ” and the “DC Resistivity” tab sheets. The other two
tab sheets have each a different looking.
Following tab sheets can be selected:
Setup
This sheet provides access to the definition of the device under Test (DUT),
measuring conditions, test cell settings, heating controller settings, options and
auxiliary information.
See chapter 9.3 Setup for further details.
Ta
b S
he
e
ts
Heater & Cell Status
Basic Buttons
Middle Section
Summary of Contents for 2830
