
44
Software
Not Saved
Each time when the solid test cell is being
selected the temporary file 2830.xml is
created.
If then no file is loaded or created before a
measurement will be recorded and the solid
cell is being deselected, then this dialog
pops up. If no is clicked all recorded values
will be deleted.
Warmup Message
To achieve the full accuracy the system
needs a warmup time of 30 minutes. If the
2830 application is started without waiting
30 minutes, then this information message
pops up and count the remaining time
down.
By clicking on cancel the countdown is
stopped and the dialog is closed. But if this
is done then the accuracy is reduced.
9.2
File Manager
With the help of the File Manager several basic file operating such as create, save, load etc. can
be done. The standard path for the saving and loading dialog is the subfolder “Data” of the set
Data Directory in the sub tab sheet Options (see 9.3.4 Options).
On each tab sheet the File Manager can be accessed by clicking on the following button on the
bottom right of the window
By clicking the this button a window with a button list pops up. The buttons have following functions:
New
The File Selector Dialog pops up where you can enter a
name for the new file.
New based on Template
The File Selector Dialog pops up and a new test file can
be generated which will be based on an existent file. The
DUT Info will be used from the source file, the
Summary of Contents for 2830
