manualshive.com logo in svg

Haag-Streit VISUTRON 900 Touch, User Manual

Share
Download
Haag-Streit VISUTRON 900 Touch User Manual Download Page 9

Unpacking Instructions

Great care is taken to deliver the Visutron 900 

Touch

 intact. Please read this User’s Guide before operating 

the unit.
We package the instrument in shipping containers to protect the instrument from damage during shipping. 

Please carefully remove the Phoroptor Head, Controller, Central Unit, and Accessories Box from the 

packaging material.

Note:  

Please retain the original packaging and use it if future transportation of the instrument is required.

The main components of the Visutron 900 

Touch

 are packed in two separate boxes. The first box contains the 

Phoroptor Head and Reading Rod, the second box contains the Central Unit, Controller, and Accessories Box.  

Note: 

The Accessories Box includes a power cord, cable for the Phoroptor Head, Bluetooth antenna for 

the Central Unit, ClearChart 4 Bluetooth Adaptor, near vision card and illuminator, face shields, dust 

covers for the Phoroptor Head and Controller, and User’s Guide.

Note:  

If any accessories or parts are missing, immediately contact Reichert.

Parts Identification 

One of the following Visutron 900 

Touch

 Systems is in the shipping container, depending on the system speci-

fications ordered.

Systems Without Prisms

Systems With Prism

Visutron 900 

Touch

 System - Middle Mount

16243

Visutron 900 

Touch

 System - Middle Mount

16246

Visutron 900 

Touch

 Head Assembly

16222

Visutron 900 

Touch

 with Prism Head Assembly

16223

Central Unit

16219

Central Unit

16219

Controller

16228

Controller

16228

Visutron 900 

Touch

 System - Left Mount

16244

Visutron 900 

Touch

 System - Left Mount

16247

Visutron 900 

Touch

 Head Assembly

16224

Visutron 900 

Touch

 with Prism Head Assembly

16225

Central Unit

16219

Central Unit

16219

Controller

16228

Controller

16228

Visutron 900 

Touch

 System - Right Mount

16245

Visutron 900 

Touch

 System - Right Mount

16248

Visutron 900 

Touch

 Head Assembly

16226

Visutron 900 

Touch

 with Prism Head Assembly

16227

Central Unit

16219

Central Unit

16219

Controller

16228

Controller

16228

The following accessories are included in all Visutron 900 

Touch

 Systems:

Item

REF

Item

REF

User’s Guide - German

16243-101-GER

Dust Cover – Phoroptor Head

559-153

Power Cord 230V

WCBL10027

Dust Cover – Controller

16217-029

Phoroptor Cable - Middle Mount

559-275

Near Bright Illuminator Kit

16200-869

Phoroptor Cable - Left/Right Mount

559-276

Face Shield Kit (2 sets)

16200-835

ClearChart 4 Bluetooth Adapter

13779

The following optional accessories are available for use with the Visutron 900 

Touch

 System:

Item

REF

Item

REF

Decimal Near Vision Kit

16237

Snellen Near Vision Kit

16236

Extension Cable (15ft),  

Visutron 900 

Touch

 Head or Controller

16213-432

Extension Cable (25ft),  

Visutron 900 

Touch

 Head or Controller

16213-433

Thermal Printer

16230

Cables and Bluetooth Dongle Kits

(Various)

Phoroptor Cable - Left/Right Mount

559-276

Snellen Card Holder

16231

Decimal Card Holder

16235

Card Beam Assembly

11636-860

Instrument Setup

9

16243-101 Rev. G

Summary of Contents for VISUTRON 900 Touch

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands