manualshive.com logo in svg

Haag-Streit VISUTRON 900 Touch, User Manual

Share
Download
Haag-Streit VISUTRON 900 Touch User Manual Download Page 35

Prism Units

•  X/Y coordinates  

(Base In, Base Out, Base Up, Base 

Down)

•  Polar (Polar coordinates)

Retinoscopy

•  1.5 D 

•  2.0 D

Fog Amount

Select the amount of auto-fogging preferred:

•  +0.50D

•  +0.75D

•  +1.00D

•  +1.50D

•  +2.00D

BB Fog Amount

Select the amount of auto-fogging preferred for

the Binocular Balance Test

•  +0.50D

•  +0.75D

•  +1.00D

•  +1.50D

•  +2.00D

•  None

VA Up Arrow

•  Improves VA: Tap 

VISUAL ACUITY UP

 

to improve visual acuity.

•  Increases Size: Tap 

VISUAL ACUITY 

UP

 to increase the size of the Optotype 

(decrease Visual Acuity).

NRA/PRA Order

•  NRA/PRA: Find the upper limit (increase plus), 

then the lower limit (decrease plus).

•  PRA/NRA: Find the lower limit (decrease plus), 

then the upper limit (increase plus).

Near Chart Units

•  Snellen

•  Decimal

Binocular Only

Leaves both eye apertures open during  

all far vision tests when selected to ON.

CC Button

•  Final 

•  REF

Subj Overwrite Protection

•  On - Attempting to start a subjective refraction 

using existing AR, LM, or REF data will NOT 

copy that data if there is already subjective 

information. A warning will be displayed 

indicating the Subjective data is protected. 

•  Off - Attempting to start a subjective refraction 

using existing AR, LM, or REF data will copy 

that data to the Subjective dataset, overwriting 

any existing Subjective data. 

WARNING: 

If set to “Off”, any attempted modification 

of the above datasets will overwrite existing refrac-

tion data. If switching between datasets to allow the 

patient to compare prescriptions, do not modify the 

data or the Subjective refraction data will be over-

written.

Instrument Setup

 (continued)

Settings

 (continued)

Settings Options

 (continued)

35

16243-101 Rev. G

Summary of Contents for VISUTRON 900 Touch

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands