EMR and Printing
It is essential to either send the refraction data to an EMR system or the printer before clearing data and
preparing for the next patient. The refraction data is not stored in the Visutron 900
Touch
, so it cannot be
recalled for reference at a later time.
Visutron 900
Touch
data is able to be sent electronically to an EMR system, printed, and manually re-
corded.
Note:
Results may be both printed and sent to an EMR system as long as the user configures both the
printer and EMR ports for output in the Settings menu.
After the exam is completed and the Data Output options are set, press the
OUT
button, or tap
Out
to
transfer the data out.
Note:
The default data that is sent to the EMR system or the printer is the Final refraction data. If the
measurements are not saved as Final refraction data, the Subjective refraction data is sent.
If the data was sent successfully, a message will appear in the top left of the screen. If there is an error
and the data is not able to be sent out, an error will appear. Refer to Figure PE-14.
Figure PE-14 Export Failed
Performing an Exam
(continued)
65
16243-101 Rev. G
Summary of Contents for VISUTRON 900 Touch
Page 1: ...VISUTRON 900 Touch User s Guide ...
Page 85: ...Notes 85 16243 101 Rev G ...
Page 86: ...Notes 86 16243 101 Rev G ...
Page 87: ...Notes 87 16243 101 Rev G ...
