Troubleshooting
Service Menu
(continued)
Keyboard Test
Buttons
1. Tap
Keyboard Test
to begin
the test, which ensures that all
of the Keypad buttons function
properly. Refer to Figure IS-35.
2. Press each Keypad button
to ensure all buttons function
properly.
3. Tap
Reset Button
to restore
the list of buttons.
Note:
As each button is pressed,
if it is functioning properly,
the name of the button will
disappear from the list.
Sound Control
The Sound Control section tests
the sounds emitted by the Con-
troller when performing various
functions.
The following list explains the sounds:
• Beep - Indicates an error message or that certain keys are not active when performing certain
operations in the Visutron 900
Touch
.
• Chirp - Indicates that a test or function completed successfully.
• Click - Is a response to pressing buttons or pressing and turning the Control Knob.
Test Mode
The Test Mode section verifies the function of the Control Knob.
1. Tap
Start Test
.
2. Turn the
CONTROL KNOB
to the right and left one click stop to test the knob.
Firmware Version
Tap
Get Version
to view the keyboard firmware version of the instrument.
LED Control
The LED Control section tests all of the LED lights that backlight the Keypad buttons.
• All On
- Illuminates all of the keys at once.
• Cycle
- Illuminates the keys one at a time.
• Brightness
- Adjusts the illumination of the LEDs in the Keypad.
Tap
Exit
to close the Keyboard Test screen.
Figure IS-35, Keyboard Test Screen
74
16243-101 Rev. G
Summary of Contents for VISUTRON 900 Touch
Page 1: ...VISUTRON 900 Touch User s Guide ...
Page 85: ...Notes 85 16243 101 Rev G ...
Page 86: ...Notes 86 16243 101 Rev G ...
Page 87: ...Notes 87 16243 101 Rev G ...
