Haag-Streit VISUTRON 900 Touch, User Manual

Page: 42 / 88

Data Input
Previous measurements can be imported as a starting point for a refraction. The data table containing
columns of data is on the main screen. These columns are used to display data imported from connect-
ed equipment, or data entered manually. Refer to Figure PE-03.
Figure PE-03 Import Data
Inputting Data Electronically
The Visutron 900 Touch allows data to be entered electronically from pre-test equipment, such as
Lensmeters and Auto Refractors. Entering data into the Visutron 900 Touch is possible using one of the
following options:
• Direct Connection - The lensmeter and autorefractor are directly connected to the Visutron 900
Touch using a serial cable or Bluetooth adapter, and their data populates the AR and LM data fields.
• Imported Data List - The pre-test data is sent directly to the Visutron 900 Touch and the data are
stored in a Data List.
• EMR - If the EMR system interfacing with the Visutron 900 Touch supports two-way communication,
the pre-test devices can send data to the EMR system, and then the EMR system sends the pre-test
data to the Visutron 900 Touch . When pre-test data is sent to the Visutron 900 Touch from the EMR,
it will automatically populate the AR, LM, and REF fields.
Performing an Exam
(continued)
42 16243-101 Rev. G