manualshive.com logo in svg

Haag-Streit VISUTRON 900 Touch, User Manual

Share
Download
Haag-Streit VISUTRON 900 Touch User Manual Download Page 12

Connecting the Visutron 900 

Touch

 System 

(continued)

1.  Align the pins in the Phoroptor Cable with the Phoroptor head. 

Refer to figure IS-03.

2.  Connect the cable by turning the metal collar clockwise until it is 

fully secure. Refer to figure IS-04.

3.  Connect the other end of the Phoroptor Cable to the Phoroptor 

port in the Central Unit. Refer to Figure IS-05.

4.  Connect the built-in cable on the Controller to the Controller port 

on the Central Unit. 

5.  Connect the Power Cord to the Central Unit, then plug in the 

power cord to an outlet providing appropriate voltage. Turn the 

unit on by turning the ON/OFF switch to ON.

6.  Connect the Projector to the Projector port on the Central Unit in 

one of the following ways. 
a.  Refer to the 

Connecting with Cables

 section if connecting 

with cable. 

b.  Refer to the 

Connecting with Bluetooth Dongles

 section if 

connecting with Bluetooth. 

c.  Refer to the 

Connecting With Bluetooth USB (ClearChart 4 

Series Only) 

section if connecting with Bluetooth USB. 

7.  Connect Lensmeters or Auto Refractors to the Instrument 1 or 

Instrument 2 ports on the Central Unit in one of the following 

ways. 
a.  Refer to the 

Connecting with Cables

 section if connecting 

with cable. 

b.  Refer to the 

Connecting with Bluetooth Dongles

 section if 

connecting with Bluetooth. 

8.  Connect a computer to the EMR port on the Central Unit in one 

of the following ways. Refer to the

 

EMR Setup

 

section for setup 

instructions. 
a.  Refer to the 

Connecting with Cables

 section if connecting 

with cable. 

b.  Refer to the 

Connecting with Bluetooth Dongles

 section if 

connecting with Bluetooth. 

9.  If needed, connect the Transfer port to another Visutron 900 

Touch

 in one of the following ways to send data from one device 

to another.

 

Refer to the 

Daisy Chaining Multiple Visutron 900 

Touch’s

 section for instructions. 

a.  Refer to the 

Connecting with Cables

 section if connecting 

with cable. 

b.  Refer to the 

Connecting with Bluetooth Dongles

 section if 

connecting with Bluetooth. 

c.  Refer to the 

Connecting with Internal Bluetooth 

section if 

connecting with Bluetooth. 

Connecting a Right or Left Mount Visutron 900 

Touch

Connect the Visutron 900 Touch using the connection cable (559-276) 

according to Figure IS-05A.

Instrument Setup

 (continued)

Figure IS-03, Phoroptor Cable

Figure IS-04, Phoroptor Connected

Figure IS-05, Phoroptor Connected

Figure IS-05A, Connection Diagram

12

16243-101 Rev. G

Summary of Contents for VISUTRON 900 Touch

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands