manualshive.com logo in svg

Haag-Streit VISUTRON 900 Touch, User Manual

Share
Download
Haag-Streit VISUTRON 900 Touch User Manual Download Page 34

Instrument Setup

 (continued)

Settings

The Settings menu is accessible from the Main screen, by tapping the gear icon on the top right corner.

1.  Tap 

Settings

, located at the top right of the Controller screen.

2.  To modify a setting, tap the box of the setting to reveal a drop-down list of options.

3.  Tap the option in the list to select it.

4.  Repeat for each setting to change.

5.  Tap 

Save

 in the bottom right corner of the screen when finished.

Figure IS-35, Settings Screen

Settings Options

Language

•  English

•  German

•  French 

•  Spanish

•  Italian

•  Portuguese

Refraction Sequence

•  SCA (sphere, cylinder, axis)

•  SAC (sphere, axis, cylinder)

•  SCAS (sphere, cylinder, axis, sphere)

•  SACS (sphere, axis, cylinder, sphere)

•  SCACS (sphere, cylinder, axis, cylinder, sphere)

Aperture Default

•  Both Open

•  Right Open

•  Left Open

Axis 0/180

•  0º 

•  180º

34

16243-101 Rev. G

Summary of Contents for VISUTRON 900 Touch

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands