manualshive.com logo in svg

Haag-Streit VISUTRON 900 Touch, User Manual

Share
Download
Haag-Streit VISUTRON 900 Touch User Manual Download Page 37

Output Options

CVD (Corneal Vertex Distance)

The subjective refraction data sent to EMR and the printer is adjusted according to the selected vertex 

distance. The CVD of the Visutron 900 

Touch

 head is 16mm and the values displayed in the main data 

area are shown using that CVD. The subjective refraction data sent to EMR and the printer is adjusted 

according to the vertex distance selected here.

•  0 mm
•  12 mm
•  13.5 mm
•  16 mm
•  18 mm

Reset Exam

When “On”, this will automatically clear the exam data after an exam is exported. 

EMR Settings

Which data to send to an EMR system:
•  Subj (Subjective)
•  AR (Auto Refractor) (Not needed in two-way EMR communication.)
•  LM (Lensmeter) (Not needed in two-way EMR communication.)

Autoload

Determines which refraction information to start the refraction with.

•  None - Does not autoload pre-test data
•  AR - Autoloads the autorefractor data
•  LM - Autoloads the lensmeter data
•  REF - Autoloads the imported refraction data

Printer Section

•  Far (prints only distance vision)
•  Near (prints only near vision)
•  Far/Near (prints distance and near vision)
•  Far/Add (prints distance and near vision addition)

In the first column, select which datasets should be printed: Subj, AR, and/or LM. In the second column, 

select which test results should be printed: Visual Acuity, FCC (Fused Cross Cylinder), NRA/PRA, ACC 

(Amplitude of Accommodation), Phoria, and/or Vergence.

Instrument Setup

 (continued)

Settings

 (continued)

37

16243-101 Rev. G

Summary of Contents for VISUTRON 900 Touch

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands