accessories & options
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
© 2008 h/p/cosmos sports & medical gmbh [email protected] created 01.09.2008 printed 08.10.2008 page: 146 of 176
[10.I]
Wheelchair ramp
When using the wheelchair access ramp pay particular attention to the gap
between ramp and running belt that hands, hair, clothing or other items do not get
caught. The ramp should not touch the running belt as this will lead to excessive
wear. Ensure that the ramp is stable and cannot slip. Be aware of danger of
slipping or tripping on ramp. Do not attempt to mount ramp from the side. Only
original h/p/cosmos wheelchair access ramps should be used.
wheelchair ramp 150/50 [cos16186]
[10.J]
h/p/cosmos wheel chair stabilizer for oversize running machines
With the help of the h/p/cosmos wheel chair stabilizer it is easy
to keep wheel chairs with 4 or 3 wheels safely in lane. The
guide rail is fixed between the two pillars of the right-hand side
handrail. The metal spring, which has to be mounted on the
guide rail, prevents the wheel chair from rolling too far back.
The wheel chair stabilizer is available for the h/p/cosmos
running machine series with track size 200/75cm (and bigger)
with the mark “r”. The wheelchair application is only allowed in
combination with the safety harness (chest belt and fall-stop).
Take care that the brakes at the wheelchair are deactivated
(e.g. demount brake suspension).
Before using the running machine for any application without a wheelchair (running, cycling,
skating etc.), the wheelchair stabilizer has to be dismantled for safety reasons. No remaining
dangerous barrier, crossbar or other part of the wheelchair stabilizer must obstruct or injure the subject.
