OPERATION
87
OUTPUT
Ends the sequence operation.
CAUTION
The
OUTPUT
key does not the start sequence
operation.
Use the
PRESET 1
(
) key to start the sequence
operation. Even if the sequence function is
activated and the ―● SEQUENCE LED‖ is lit, the
sequence operation will not start unless the
PRESET 1
(
) key is pressed. Functions other
than the preset function will work normally even
when the ―● SEQUENCE LED‖ is lit.
If the
OUTPUT
key is pressed when a sequence is
running, the sequence operation finishes. Note that
ending a sequence operation is different from
turning off the output in the normal operating
mode.
4.
The display during a sequence operation is
different from that in normal operation. The
differences are shown below. When the
ESC
/
DISP
key is pressed during a sequence
operation, the step number is displayed on the
Voltage LED and the number of cycles is
displayed on the Current LED. Press the
ESC
/
DISP
key again to return to the previous
display.
Press
DISP
key
Step No.
Number
of cycles
Number of steps
Display 1 in sequence
operation
Display 2 in
sequence operation
5.
During a sequence operation, the
―●
SEQUENCE LED
‖
below
the
PRESET
key blinks, indicating that
sequence operation is being executed. To stop
All manuals and user guides at all-guides.com
