PSB-2000 Series User Manual
132
after completion of communication with the local bus.
Remote/Local Setting (:REMOTE)
This command sets or inquires about the remote/local status.
Setting
:REMOTE <value>
<value> is as shown below:
0: Local status (Normal manual operation)
1: Remote status
2: Local lockout remote status (Cannot return to the local
status through key operation.)
Application
example
:REMOTE0
Sets the unit to local status.
Query
:REMOTE?
Response
example
1
Indicates that the unit is in the remote status. The query
return value has the same meaning as the setting <value>.
Remark
If this query is sent when the unit is in the local status, a
response is made after the unit enters the remote status.
Thus, 1 is returned.
All manuals and user guides at all-guides.com
