PSB-2000 Series User Manual
76
External Control Functions
Description
The following connectors are supplied with the
power supply for external control.
Procedure
1.
XG5M-2635-N (manufactured by OMRON
Corporation) (For all PSB-2000 series)
This section describes how to assemble the
external control connector
Assembling the XG5M-2635-N Connector
Procedure
1.
Remove the contacts from the housing.
Each contact can be easily removed by pulling
it out while using a pin to hold down its catch.
The contacts can also be removed using the
XY2E-0001 removal tool (manufactured by
OMRON Corporation).
2.
After connecting a wire to each contact, insert
the contacts into the connector.
When inserting the contacts into the connector,
ensure that the catch of each contact is firmly
latched to the connector.
When connecting a wire to each contact, use
the XY2B-7006 crimping tool (manufactured by
OMRON Corporation).
Applicable wire:
Twisted wire AWG28 or 26
Outer diameter φ1.1 to 1.3 mm
3.
Mount semi-covers on both sides of the
connector.
All manuals and user guides at all-guides.com
