EXTERNAL CONTROL
113
Common
Model inquiry
-
*IDN?
---
129
ESR query
-
*ESR?
---
130
Event enable
*ESE
*ESE?
---
130
STB query
-
*STB?
---
130
SRQ enable
*SRE
*SRE?
---
130
Clear
*CLS
-
---
130
Reset
*RST
-
---
130
Completion
*OPC
*OPC?
---
131
Wait for
completion
*WAI
-
---
131
Extension
Local
communication
:ADDR
-
105
131
Remote mode
:REMOTE
:REMOTE?
49
132
Output Voltage Setting (:VOLT)
This command sets or inquires about the output voltage.
Setting
:VOLT <value>
Sets the output voltage of a single channel model.
:VOLT:A <value>
Sets the output voltage of CH1.
:VOLT:B <value>
Sets the output voltage of CH2.
The <value> range is from 0.00 to 82.00 (PSB-L), 0.0 to
820.0 (PSH-H).
Two decimal places are valid.
Application
example
:VOLT 10.10
Sets the output voltage of a single channel model to
10.10V.
Query
:VOLT?
Inquires about the set output voltage of a single channel
model.
:VOLT:A?
Inquires about the set output voltage of CH1.
:VOLT:B?
Inquires about the set output voltage of CH2.
Response
example
10.10
Indicates that the set output voltage is 10.10V.
Remark
When the tracking mode is on, setting CH1 will affect
CH2. Setting CH2 in the tracking mode will cause an
execution error.
All manuals and user guides at all-guides.com
