GW Instek GBM-3080, User Manual

Page: 146 / 184

GBM-3080/3300 User Manual
146
OFF Disable both the comparators for voltage and
for resistance.
Example ->:CALC:LIM:STAT OFF
->:CALC:LIM:STAT?
->OFF
Note :CALCulate:LiMit:STATe command enables or disables
the comparators for voltage and for resistance
simultaneously.
If a single comparator for resistance or voltage needs
to be used, use the :RES:LMT:STATe
and :VOLT:LMT:STATe commands.
:CALCulate:LIMit:BEEPer
Description
Sets the comparator buzzer.
Syntax :CALCulate:LIMit:BEEPer{0/OFF, HL/NG/FAIL,
IN/OK/PASS}
Query Syntax :CALCulate:LIMit:PEEPer?
Return parameter OFF Disable the comparator buzzer.
HL Buzzer sounds when testing is failed
IN Buzzer sounds when testing is passed
Example ->:CALC:LIM:BEEP HL
->:CALC:LIM:BEEP?
->HL
:CALCulate:LIMit:RESistance:MODE
Description
Sets and returns the comparator mode for
resistance.
Syntax :CALCulate:LIMit:RESistance:MODE{HL, REF, ABS}
Query Syntax :CALCulate:LIMit:RESistance:MODE?
Parameter /
Return parameter HL Upper and lower limits of direct readout
comparison(SEQ)
Set
Query
Set
Query