GW Instek GBM-3080, User Manual

Page: 115 / 184

REMOTE CONTROL
115
Default
parameter CR+LF
Set up hand shake function
Because the device uses the smallest subset of the RS-232 standard
and doesn’t use hand shake signals for hardware, the device can
activate hand shake for software in order to reduce possible data
loss or data errors in communications. Software engineers of high
level language should be strict to the following hand shake
agreement to establish compilation of computer communication
software:
Handshake
agreement

The command line parser of the device only
accepts ASCII format and the response to
command also returns in ASCII code.

The command string sent by the host must end
with a terminator. The command line parser of
the device starts executing the command string
only after receiving the terminator.

When the device is set to enable handshake
command, the device will send the character
back to the host immediately after each
character is received. The host can send the next
character only after receiving the returned
character.