GBM-3080/3300 User Manual
166
:SYSTem:CALibration:AUTO
Description
Sets or returns the status of self-calibration
function.
Syntax
:SYSTem:CALibration:AUTO {OFF/0, ON/1}
Query Syntax
:SYSTem:CALibration:AUTO?
Parameter/Return
parameter
0
Disable the self-calibration function of device.
1
Enable the self-calibration function of device.
The device will self-calibrate once per 30
minutes.
Example
->:SYST:CAL:AUTO OFF
->:SYST:CAL:AUTO?
->OFF
:SYSTem:RESult
Description
Sets or returns the means for sending data.
Automatic or by using FETCH instruction.
Syntax
:SYSTem:RESult {FETCH, AUTO}
Query Syntax
:SYSTem:RESult?
Parameter/
Return parameter
FETCH The data can only be returned to the master
through Fetch instruction. The device
passively sends the data.
AUTO
The test results are automatically sent to
the master after each test is completed.
Example
->:SYST:RES AUTO
->:SYST:RES?
->AUTO
:SYSTem:DATAout
Description
Sets or returns the means for sending data.
Set
Query
Set
Query
Set
Query
Summary of Contents for GBM-3080
