REMOTE CONTROL
113
Set up the style of sending result
If the Result setting it set to Auto, the device will automatically
send out the measurement results each time a test is finished. This
kind of setting is convenient especially when the device is working
with a sorting machine. The device will start a test after receiving
the trigger signal and then returns the test result to the sorting
machine without the need to receive a “fetch?” command from
either the sorting machine or the control PC.
Steps
1.
Press
SYSTEM
key below the LCD
screen to enter [SYSTEM CONFIG]
setting page.
2.
Use up and down arrow keys to
select
RESULT
on this setting page.
The selected item will be
highlighted.
3.
Press option key on the right of the
LCD screen to change setting.
Available
parameter
FETCH The device will not send out the test result
after the test.
AUTO
The device will send out the test result after
the test.
Summary of Contents for GBM-3080
