background image

GUIDO RAYOS X, S.A.

NESTOMAT 6050

45

MAN-012
Sept.00
Ed. 1 / Rev. 3

WARRANTY

GUIDO RAYOS X S.A. (hereinafter referred to as GRX) warrants that each
NESTOMAT Radiant Warmer will be free from defects in material and workmanship
under normal use and service for a period of one year from the date of delivery by GRX
to the first purchaser. If any such defect occurs during the warranty period, the aforesaid
purchaser should communicate directly with GRX agent. If returned, GRX's agent will
arrange for repairs or replacement within the terms of warranty. The defective
instrument should be returned properly packed, freight prepaid. Loss or damage in
shipment to GRX agent shall be at purchaser's risk. This same warranty is made for a
period of thirty days with respect to the expandable parts.

In no event shall GRX be liable for any incidental, indirect, or consequential damages
in connection with the purchase or use of the Radiant Warmer. This warranty shall not
apply to, and GRX shall not be responsible for any loss arising in connection with the
purchase or use of any such Radiant Warmer wich has been altered by anyone other
than an authorized GRX representative or altered in any way so as, in GRX's
judgement, to affect its stability or  reliability or wich has been subject to misuse,
negligence, or accident, or wich has been used otherwise than in accordance with the
instructions furnished by GRX. This warranty is in lieu of all other warranties, express
or implied,  and of all other obligations or liabilities on GRX's part, and GRX neither
assumes or authorizes any representative or other person to assume for it  any other
liability in connection with the sale of such Radiant Warmer.

GRX disclaims all other warranties, express or implied, including any implied warranty
of merchant ability or of fitness for a particular purpose or application other  than those
expressly set forth in the appropiate product labelling or user information manual.

Summary of Contents for NESTOMAT 6050
















































Reviews: