GUIDO RAYOS X, S.A.
NESTOMAT 6050
12
MAN-012
Sept.00
Ed. 1 / Rev. 3
II.3. TO HEAT
If Preheating Mode was not selected, proceed as follows:
Press any key, the LCD will display,
AIR=__._ ºC
SELECT MODE
To select the Operation Mode press AIR or SERVO key. AIR key
corresponds to Air Control Mode; SERVO key corresponds to Servo
Control Mode (patient skin temperature).
A) AIR CONTROL MODE:
NOTE: T
HE DIGITAL DISPLAY INFORMS THE TEMPERATURE OF THE AIR
WHERE THE NEWBORN IS
PLACED
.
Pressing
AIR
key, the LCD will display ,
AIR=__._ ºC
PSET AIR=__._
By means the numerical keypad, set the heating device working range
between 20 and 40 ºC.
NOTE: W
HEN SETTING TEMPERATURE ENTER ALWAYS
3
DIGITS
,
EVEN IN
CASE OF NO DECIMALS
. A
S EXAMPLE PRESS
3,
THEN
7,
THEN
0
TO SET
37
DEGRESS
.
Then press
ENTER
to confirm, the LCD will display ,
AT=__._ (__._)
PRESS START
Then press
START
to start the heating. The heat lamp will indicate the
operation of the heating device. By reaching the selected heating range,
the heating devices will modulate to keep the temperature stable.
The LCD will display the air registered temperature, as well as will
inform, too, the set temperature, displaying
ACTIVED UNIT
to inform
the heating device is in operation.
Summary of Contents for NESTOMAT 6050
Page 31: ...GUIDO RAYOS X S A NESTOMAT 6050 31 MAN 012 Sept 00 Ed 1 Rev 3 1 2 2 3 4 5 6 7 8 9 10...
Page 37: ...GUIDO RAYOS X S A NESTOMAT 6050 37 MAN 012 Sept 00 Ed 1 Rev 3...
Page 38: ...GUIDO RAYOS X S A NESTOMAT 6050 38 MAN 012 Sept 00 Ed 1 Rev 3...
Page 47: ...GUIDO RAYOS X S A NESTOMAT 6050 47 MAN 012 Sept 00 Ed 1 Rev 3...
