GTS BG 132, Installation And Operating Manual

Page: 60 / 128

Sy
nch
ro
no
us g
en
er
at
or
s o
f s
er
ie
s D
G
G
, D
W
G a
nd W
G
Issue 05/2013 Page 60
Installation of generator
Installation of dual-bearing generators (BG 132)
Assembly
Ö
Fig. 19, Assembly of flange mount
(dual-bearing, BG 132 model with reinforced bearing plate), page 60
>
Apply Loctite to the screw thread of the four screws [2a] and place
a toothed washer [2b] underneath the screw.
>
Place the flange [1] onto the generator and secure with four screws [2a] to
a tightening torque of 75 Nm.
>
Mount the coupling plate [3] on the shaft at the generator and prevent it
from twisting on the shaft with a key.
>
Secure the drive side of the coupling [4] to the drive and insert it into the
coupling plate. If necessary, while inserting, twist slightly until the gearing
locks.
>
Secure the flange [1] to the drive unit.
1
4x
2a
2b
3
4
2a M12 x 40 DIN 933
2b VH12 DIN 128
Fig. 19 Assembly of flange mount
(dual-bearing, BG 132 model with reinforced bearing plate)