Installation & User Manual - Oncam C-12 Series
©
Oncam Global Group AG, 2021. All rights reserved.
191
Figure 259 Date / Time Manual Setting
5.8.2.5 Save Changes
To apply changes made in this section, click the
Save Changes
button in the bottom right-hand
corner. A confirmation notification will be briefly displayed in the bottom left-hand corner.
5.8.2.6 Restore Defaults
Select
Restore Defaults
if you want to return to the pre-set defaults of the page.
A refresh of the page may be required to see some of the changes.
5.8.2.6.1 How to Set the Date and Time using NTP
Network Time Protocol (NTP) is supported to enable automatic synchronization of the camera
clock time to the global network time.
Changes to the NTP configuration need to be made in the Network Section. Go to
Network
> Network Configuration > NTP Server
or use the link provided.
In this section, the NTP server address can be changed, this has been prepopulated with a
Public NTP address. To change it, type your preferred NTP IP address or domain name and
save changes.