InstallatIon sheet
1126 Series Ceiling Mount PIR Motion Detector
Description
The 1126 Series PIR (Passive Infrared) Motion Detectors are a compact wireless PIR. The 1126 Series offer 360°,
Wide Angle, or Curtain versions making the 1126 Series flexible for a variety of ceiling mount applications.
The 1126 Series PIR operates with the XR500 Series or XR100 Series Command Processor™ panels using Version 201
and the 1100X Version 104, 1100XI Version 105, or 1100XH Version 105 Wireless Receivers.
Features
• Compact Design provides the smallest ceiling mount infrared sensor
• Remote configuration from panel
• Excellent R.F.I. and noise immunity
• Adjustable sensitivity from panel programming
• Pulse count selection allows multiple triggers before an alarm is initiated
• Walk Test mode initiated from panel
• Disarm Disable operation to save battery life
• Installs up to 18’ ceiling height
What is Included
The 1126 Series PIR Motion Detector includes the following:
• One PIR detector with DMP wireless transmitter
• One CR17450 battery
• Zone name and number label
• Serial number label
Installation
For your convenience, an additional pre‑printed serial number label is included.
Prior to installing the device,
record the serial number or place the pre‑printed serial number label on the panel programming sheet. This number
is required during programming.
As needed, use the zone name and number label to identify a specific transmitter.
Optional Detection Patterns
The 1126 allows you to tailor the detection zones to your requirement by using the optional mask that simply snaps
out of the base and inserts into the 1126C Curtain or 1126W Wide Angle PIRs.
Locking
Screw
Figure 1: Remove the Base
for Installation
Optional
Mask
Type W
Pattern
Type N
Pattern
Type N Pattern
Ty
pe W Pattern
Figure 2: Optional Detection Patterns
