FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
Contents
•
IR Night Vision Camera
•
Mounting Kit / Allen Key
•
BNC / power extension cable
•
Power adapter*
* A “4-in-1” Power Adapter that provides power to four cameras may be substituted for four
individual power adapters, depending on product configuration.
NOTE:
Extension cables and power adapters may be packaged separately.
Copyright © 2013 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
Camera Specifications
Image Sensor
1/3” Sony EXview™ II 960H
Video Format
NTSC
Effective Pixels
H: 976 V: 494
Resolution
up to 700 TV Lines
Scan System
2:1 Interlace
Sync System
Internal
S / N Ratio
>50dB (AGC Off)
Iris
AES
AES Shutter Speed
1/60 ~ 1/100,000 Sec.
Min. Illumination
0.15 Lux without IR LED
0 Lux with IR LED
Video Output
Composite 1.0Vpp @ 75ohm
Lens / Lens Type
3.6mm F2.0 / Fixed
FOV (Diagonal)
90°
Termination
BNC Type
IR LED Qty. / Type
18 pieces / 850nm
Night Vision Range*
120ft (37m) / 85ft (26m)
Power Requirement
12V DC ±10%
Power Consumption
Max. 370mA (w / IR)
Operating Temp. Range
14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range
< 80% RH
Indoor/Outdoor**
Both (IP66)
Weight (including stand)
0.6lbs / 0.2kg
* Stated IR illumination range is based on ideal conditions in typical outdoor night time ambient
lighting and in total darkness. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
** Not intended for submersion in water. Installation in a sheltered location recommended.
WARNING
- A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Warning/Caution
•
Read this guide carefully and keep it for future reference
•
Follow all instructions for safe use of the product and handle with care
•
Use the camera within given temperature, humidity and voltage levels
noted in Camera Specifications
•
Do not disassemble the camera
•
Do not point the camera directly towards the sun or a source of intense
light
•
Use only the supplied regulated power supply. Use of a non-regulated, non-
conforming power supply can damage this product and voids the warranty
•
Periodic cleaning may be required. Use a damp cloth only. Do not use
harsh cleaners or aerosol cleaners
•
The supplied extension cable is rated for surface mounting only
•
Cables for in-wall / floor-to-floor installations are sold separately
Installation Tips
•
Point the camera where there is the least amount of
obstructions (i.e. tree branches)
•
Install the camera in a location that is difficult for vandals
to reach
•
Secure cabling so that it is not exposed or easily cut
•
Camera rated for outdoor use. Installation in a sheltered
location recommended
SUPER+ RESOLUTION WEATHERPROOF
NIGHT VISION SECURITY CAMERA
Quick Start Guide
English Version 1.0
MCB7041
153mm / 6.0”
53mm / 2.1”
Dimensions
57mm / 2.2”
Features
•
960H resolution capable*
•
Advanced Sony EXview™ II image sensor
•
Video image processor delivers up to 700TV lines of
resolution
•
Wide angle 3.6mm lens (90° Field of View, diagonal)
•
ClearNight imaging technology ensures clear night vision
and improves recording efficiency up to 30%
•
Night Vision up to 120ft away in ambient lighting
conditions and up to 85ft away in total darkness**
•
Split glass design minimizes IR reflection
•
Weatherproof (IP66) rated housing for indoor/outdoor
installations***
•
Cable pass-through bracket
Disclaimers:
* When connected with 960H capable DVR.
** Stated IR illumination range is based on ideal conditions in typical outdoor night time ambient
lighting and in total darkness. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
*** Not intended for submersion in water. Installation in a sheltered location recommended.
